Vehicle Details
- Year: 2007
- Make: Porsche
- Model: 911 GT3
- VIN: WP0AC29947S792340
- Mileage: 40,011
- Transmission: Manual
- Title Status: Clean (lien)
- Color: Carrara White
- Seller Type: Private Party
- Location: Newport Coast, CA 92657
- Lot #: V-0036381
The second generation of Porsche’s roadgoing GT3 homologation car, the 997 version debuted with the Porsche Active Suspension Management (PASM), advanced “zero lift” aerodynamics, and a more powerful Mezger engine. Configured at an original MSRP of over $125k, this highly optioned example has been extensively modified with a 997.2 GT3 RS widebody kit including steel fenders, bumper covers, and lights. It also received a rebuilt engine with a 4.0-liter displacement upgrade by the specialists at BBI Autosport in September of 2023 as well as a GT3 RS 4.0 clutch kit, a Sharkwerks exhaust, and welded coolant lines. Finished in Carrara White over a Black Special Leather interior, this modified GT3 is now being offered for auction by its seller out of California with just over 40k miles on the odometer.
Finished in Carrara White, this GT3 has been upgraded with a complete 997.2 GT3 RS widebody kit including steel fenders, bumper covers, and 997.2 headlights and taillights. A carbon fiber rear wing has been fitted along with carbon fiber uprights trimmed in GT Silver. Black stripes with Porsche lettering are applied to each side. Red painted brake calipers are set behind polished aftermarket wheels dressed in Michelin Pilot Sport 4S tires driven approximately 2k miles. The seller adds that XPEL paint protection film covers the front end up to the windshield along with the leading portion of the roof, A-pillars, door sills, and rear fenders. Additional images are provided in the gallery along with a clean CARFAX report.
The cabin presents Black Special Leather upholstery contrasted by Exclusive red deviated stitching along the dashboard, doors, door handles, center console side panels, rear side panels, and seats. It also features optional Guards Red seatbelts, instrument dials, and floor mat trim. Additional options include the Carbon Interior Package, a Carbon Package Switch Panel, a rear center console in carbon, Porsche-crested headrests, a storage compartment lid with a model logo, heated front seats, the Chrono Package, Sound Package Plus, and a fire extinguisher.
The original 3.6-liter Mezger flat-six engine was rebuilt and upgraded by Betim, CEO of BBI Autosport, in September of 2023 to a 4.0-liter displacement and paired with a GT3 RS 4.0 clutch kit and lightened flywheel. Power is sent to the rear wheels through a 6-speed manual transmission which was fully rebuilt by the Porsche specialists True Performance in January 2022. Additional upgrades included the installation of a Sharkwerks GT3 stainless steel exhaust system and welded coolant pipes. The seller adds that an alignment was performed as part of the engine rebuild followed by the replacement of the brake rotors. No outstanding maintenance items have been reported.
This sale will include a clean title (lien).
The seller would like you to know: “I purchased this car two years ago. It is an absolute dream to drive. It was my dream car I have wanted it since I was 15 years old. I have poured a lot of time and passion into this car. Everything from the transmission built with the RS clutch to the 4.0 L engine built by Betim at BBI AUTOSPORT. I hope the new owner will love the car as much as I did.”
Auction Results
- Sold for: $146,000
- Auction End: Nov 13, 2023 07:57:34PM UTC
- Number of Bids: 33
Comments (105)
Congrats- great buy on what looks like a great car!!
Sold for $146,000
So sad... This is like a dream set up for me but I had to sit this one out. Would've slapped some rear seats in there for my boys and had the ultimate 911 for my needs
amazing bidding yall
Nice little fistycuff going on here in the sellers favor :)
Bid in the amount of $146,000
Bid in the amount of $145,000
Bid in the amount of $142,000
Bid in the amount of $140,000
Bid in the amount of $135,000
Bid in the amount of $134,000
Bid in the amount of $133,000
Bid in the amount of $132,000
Hey guys the car is selling good luck
Bid in the amount of $130,000
Bid in the amount of $128,000
Bid in the amount of $126,000
Bid in the amount of $125,000
Bid in the amount of $123,000
Bid in the amount of $122,000
Bid in the amount of $120,000
Bid in the amount of $119,000
Bid in the amount of $117,250
Bid in the amount of $117,000
Bid in the amount of $115,500
Bid in the amount of $115,250
Bid in the amount of $115,000
Bid in the amount of $111,000
Bid in the amount of $110,000
Bid in the amount of $105,000
Good luck everyone. Thank you so much.
Bid in the amount of $101,000
Bid in the amount of $100,000
@speed5racer no offense but anyone who has driven a car like this knows that an F430 does't even compare. That is why a real RS is $300k plus and a real 4.0 RS will soon be $1m. I would take this car hands down, PS the bidding is not stopping at this price I am very certain of that. Good luck to the seller and future buyer.
Are y'all kidding?? This is a steal at <$100K!! I know, it's a buyer's market. but dang... this is tempting!! It's the closest to anything here I've considered replacing my F430 with! -sigh-
@ClayMan both front and rear are RS. Factory.
Correct no 997.2 RS flares.
What front fenders were used? Are they GT3 or RS parts? Factory or aftermarket? They don't have the flares that the 997.2 RS fenders do.
I have always wanted the 3rs 4.0L. But 400k was out of the budget. I remember when I first purchased it, wounding why it wasn’t just built to a 4.0. So after about a year of ownership I decided I really wanted it that way I envisioned it.
What prompted the rebuild to a 4.0L? It looks like the engine was previously rebuilt to a 3.8L, but it only lasted ~14k miles?
Yes it passes Cali smog.
reflashed ecm
Does the car pass California smog?
And what type of engine management is being used? A reflashed ecm?
Additional content has been added to the gallery for this listing.
The car has about 100 miles on it since the rebuild. Recommends 500 mile break in.
No spacers. The fitment looks normal. I will add some personal pictures of the car from fitment angle. There is about a 4 inch lip on the wheels. That’s why I chose those wheels. So I would not have to run spacers.
Yes it has harmonic dampener.
And light weight fly wheel
Thanks for the response .
Has the car been driven at all since the engine rebuild since you’ve been in Hawaii for 6 months now and it was done in October and how many miles is the break in procedure ?
Also for the rear wheels since it has the gt3 suspension what spacers are you running on those wheels on the car ? I assume without spacers even with widebody wheels the wheels would be sunk in tremendously ?
Does the car have a harmonic dampener for the 4.0 rs clutch and lwfw setup?
Thanks
I just noticed the 1 year or 10,000 mile warranty on the 4.0L was not mentioned on the description. 1 year starting October 16, 2023 ending October 16, 2024
Thank you everyone for all the questions and interest in this car. Even though the car is located in California currently I am living in Hawaii. I will be up at 4 AM Hawaii time , 9 AM I eastern time to answer any questions.
@ZubinK it does have a 4.0 L crankshaft. Sorry for the confusion. The decals are on top.
In the build sheet you posted it lists 4.0L crankshaft but in one of your answers a few days ago before you posted the build sheet you say 3.8L crankshaft. Does it have the 4.0L crankshaft per the build sheet or 3.8 ?
Is the Porsche side decal applied over or under the PPF ?
Thanks
@Sonnypatel only speaking from my experience with the car. I would imagine very similar to stock
@Sonnypatel it rides firm. And the handling is phenomenal.
Whoa! I have the damptronics on my 997 turbo s. Makes me wonder how they drive with this chassis. Almost wonder how they compare to stock?
@997GT3 my mistake, BILSTEIN B16 (DAMPTRONIC) COILOVERS
@997GT3 Ohlins Road & Track DFV Coilover Kit
@997GT3 the work was performed a couple months before I purchased a vehicle. I’m in contact with the previous owner now to get all the details. Sorry for the inconvenience with not 100% of all the information. Like I mentioned before I live in Hawaii, and the car is in California.
Any details on the coilovers? I assumed it was still on the stock PASM set up.
@Flsupraguy I think the fitment is perfect
@Flsupraguy the only thing that has been done is coilovers.
@taylorsw so nothing was completed to the suspension to account for the wider fenders?
Bid in the amount of $92,000
Bid in the amount of $72,000
@WReiter stock GT3 rear wheel setup/size
What did you do to account for the wider rear track of the RS? Spacers? Wider wheels with different offset? Or, did you stay with stock GT3 rear wheel setup/size?
@Flsupraguy unfortunately, the car is in California. And I am living in Hawaii. I do not have a video. Nor do I really want someone driving the car.
Driving video?
Bid in the amount of $71,000
the seller is going to ensure a new air filter will be installed prior to the vehicle changing hands. Any further comments regarding the air filter will be removed.
@Taylorsw my mechanic correction, typo
@rmw I will make sure there is a new air filter before pick up a vehicle
@luis.seneriz I will definitely have the air filter changed before the car is picked up. I am waiting for a response from Mike Mechanic if Nikasil plating was done. I don't believe so. But I’ll let everyone know.
oh wow just noticed the air filter, how long its been like that?????
Bid in the amount of $69,999
@luis.seneriz yes the air filter is about 2 years old . Prior to my owner ship.
Bid in the amount of $31,997
@M3tro81 correct, 3.8 intake. From the .2
Very cool build. I own a 997.1S and this definitely gives some ideas for future modifications.
Is that a genuine Porsche intake box, but from the .2 3.8 motor?
@robbylou correct weld it in.
Yes, the bumpers and deck are genuine Porsche.
Just confirming the write-up, is the reference to RS “steel fenders” stating that the narrow GT3 rear fenders were cut out and wider RS rear fenders were welded in?
Also are the bumpers and decklid genuine Porsche or replicas? Thanks
Can you please post a driving video?
@InsatiableAmos no damages
@InsatiableAmos I believe the body work was done through LOREN BEGGS of 911 DESIGN
@airbenz yes
Any damage history?
What shop did the body work?
Is it possible to see the car in person
@997GT3 I just added the build sheet for the clutch and engine. I do not have the labor cost on the sheet just parts.
Additional content has been added to the gallery for this listing.
@997GT3 yes I can . The welded lines were previously done before my ownership.
Is it possible to post the full build sheet from BBi? Does the build include the full monty treatment including cam actuator fix and welded coolant lines?
@awesomekaptain I was working on the engine build about 6 months ago when I relocated to Hawaii for work. Unfortunately, the car does not make sense here in Hawaii. The car is in California at my house.
@Taylorsw - beautiful car, can I ask why you're selling after so much investment and so quickly after all the work was completed?
@Flsupraguy yea OEM Brakes, and rotors.
91
@Flsupraguy unfortunately I’m in a different time zone. I can definitely upload a picture here shortly. Also the 4.0L work by BBI has a 10,000 or 1 year warranty
@Flsupraguy the car has a 500 mile break in period . The work was just completed. I did not want to push the engine quite yet.
Can you please post pics of underneath?
Does the car have OEM brakes and rotors? Is the car tuned to run on 91 or 93?
@Flsupraguy I do not .
@997GT3 Big bore. 3.8 crank shaft
Do you have any dyno numbers?
PISTON & CYLINDER SET 4.0 L kit
With titanium rods
Private party, the the car was going to go to my friends consignment dealership, but I decided to put it on Pcarmarket
Any details on how the displacement is achieved? Big bore or stroker? Was a 4.0 RSR crankshaft used?
is this a dealer car? says private but its on exotic car factory website
Bid in the amount of $30,000
Bid in the amount of $1,000