Sparco Carbon Fiber SPX Seats
Final bid:$4,000
Categories: Wheels & Parts
Auction type: ReserveSold
7 bids, 19 comments

Item Details

  • Seller: Ralphmason
  • Location: Sunrise Beach, MO, 65079
  • Lot #: P-0034251

Available for auction is a pair of carbon fiber Sparco SPX seats that are stated to be in excellent overall condition. The Sparco SPX design represents the ultimate evolution of the sports seat. The SPX uses a combination of carbon fiber and advanced composites that give the driver both comfort and performance in a lightweight package.  With the ergonomic shape of the carbon fiber backrest and the seating position of the RTM composite lower, the SPX holds the driver during extreme lateral forces and is comfortable for long road trips. The seller states the seats are used but are in like-new condition.

 Additionally, the SPX seats are covered in a combination of perforated and smooth Italian leather with Alcantara centers.  To finish off the look, all hand stitching is done in tone-on-tone black with the Sparco logo embroidered in matching black.  The gloss finished carbon fiber backrest features a leather pull strap which releases the backrest to fold forward to allow access to a backseat or storage area.  The backrest also features a micro adjustment knob that allows you to dial in the perfect driving position. The buyer is responsible for shipping, handling, and fees.

Auction Results

  • Sold for: $4,000
  • Auction End: Sep 21, 2023 08:08:40PM UTC
  • Number of Bids: 7
1,517 views43 saves

Comments (26)

Leave a comment

  • GWhuffalo (registered bidder) 8 months, 1 weekago


  • cadamson7 8 months, 1 weekago

    Sold for $4,000

  • cadamson7 (registered bidder) 8 months, 1 weekago

    Woops didn't realize it would jump it all the way up to my max bid instantly haha. Oh well!

  • GarageMonster (registered bidder) 8 months, 1 weekago

    Im officially out now as someone dumped a 4k bid once i factor in buyers fee and shipping it is almost at my dealer cost to just buy these new in the box and save the hassle of shipping etc. Good luck to the winner these are awesome seats

  • cadamson7 8 months, 1 weekago

    Bid in the amount of $4,000

  • ContempMots 8 months, 1 weekago

    Bid in the amount of $2,100

  • GarageMonster (registered bidder) 8 months, 1 weekago

    For anyone curious these seats are a tight fit on a G body, 964 and 993 fyi due to width. There doable but might not work for most depending on seating position. These fit better in 997-991 992 etc from my experience. Im interested in these for my office waiting room.

  • GarageMonster (registered bidder) 8 months, 1 weekago

    seller do you have the two original boxes for the seats? how will these be packed and shipped? Do you have any approximate of shipping costs for both seats Ground?

    Are there any scratched on the backside of the carbon or any defects as photos do not show.

  • andrew7049lee (registered bidder) 8 months, 1 weekago

    @GWhuffalo Fair points. Good luck!

  • GWhuffalo (registered bidder) 8 months, 1 weekago

    1) there is a reserve. 2) I’m in Ks so I can most likely just pick them up as well. Probably not the easiest items to ship. 3) they are beautiful 😍

  • andrew7049lee (registered bidder) 8 months, 1 weekago

    @GWhuffalo well that escalated quickly on a mistake.

  • GWhuffalo (registered bidder) 8 months, 1 weekago

    Pm sent

  • GWhuffalo (registered bidder) 8 months, 1 weekago

    I always bid 805, first one was a typo 🫢

  • GWhuffalo 8 months, 1 weekago

    Bid in the amount of $1,805

  • GWhuffalo 8 months, 1 weekago

    Bid in the amount of $804

  • wddiv 8 months, 1 weekago

    Bid in the amount of $625

  • Ralphmason (seller) 8 months, 1 weekago

    @MohawkScott They were in a 911 991.2 for a short time. They don’t have a passtrough for a 6 point but will work with 4 points with Anti-SubMarining like the Schroth Profi II ASM 4 Point

  • MohawkScott (registered bidder) 8 months, 1 weekago

    What car did they come out of? Do they have the slit in the bottom/center of them to feed a harness through between the legs?

  • kyjef 8 months, 1 weekago

    Bid in the amount of $600

  • Ralphmason (seller) 8 months, 1 weekago

    Additional content has been added to the gallery for this listing.

  • Ralphmason (seller) 8 months, 1 weekago

    Measurements: it looks like they are about 40cm by 38.5cm. I’ve attached photos so you can make your own decisions.

  • Ralphmason (seller) 8 months, 1 weekago

    @MILESAHEADPORSCHE Thanks for your question, they are beautiful ( If I say so myself). The answer is I don’t know. I’ll measure the mounts and post some pictures & measurements in the next few hours.

  • MILESAHEADPORSCHE (registered bidder) 8 months, 1 weekago

    The seats are beautiful! Do you know if they will bolt in a Porsche 928?

  • Ralphmason (seller) 8 months, 2 weeksago

    @wddiv Thanks for the question. Yes the mounting hardware is included with rails and fire extinguisher. They were very briefly in a 991.2 911, I brought them for a project that didn’t happen. They are beautiful seats ready to bolt in. I can drop at fedex for packaging and shipment at the buyers cost.

  • wddiv (registered bidder) 8 months, 2 weeksago

    Are you including mounting hardware for these and, if so, what car were they in? Are you providing boxing and drop off at UPS, FedEx, etc? Thank you!

  • ndotmoss 8 months, 2 weeksago

    Bid in the amount of $500

Sparco Carbon Fiber SPX Seats
Final bid: $4,000 Sold
You're disconnected from PCARMARKET. We're trying to get you back online. A poor Internet connection can affect your ability to see bids and comments. If the problem persists, try reloading the page.
You are using a very old and unsupported browser. Your browser is likely missing important security fixes. Some features of this site may not work. Upgrade your browser to a version supported by its manufacturer, or use the latest version of Google Chrome.